Mechanical travel

360º（Endless）

Protection grade (IP)

IP40

Starting torque

≤3mN·m(30gf·cm)

Rotational life expectancy

25℃, No load at 400 r.p.m., inverting every 15 minutes 50,000,000 shaft revolutions, Total resistance value variation:

Mass

≤±10％ against initial value, Conformity tolerance: ≤150％ of specified value, Output smoothness: within 150％ of specified value

Operating temperature range

-55℃～+105℃

Temperature cycle

5 cycles under -55℃～+105℃, total resistance value variation: ≤±10％, No mechanical damage.

Exposure at low temperature

24 hours at -55℃, Total resistance value variation: ≤±5％, No mechanical damage.

Exposure at high temperature

1,000 hours at 105℃, Total resistance value variation: ≤±10％, No mechanical damage.

Vibration

10Hz～2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±2％, No mechanical and electrical damage.

Shock

490m/s², 11ms, 18 times, Total resistance value variation: ≤±1％, No mechanical and electrical damage.

Moisture resistance

40℃, 95％RH, 120 hours, Total resistance value variation: ≤±10％,Insulation resistance: ≥10MΩ.

Resistance temperature coefficient

±400p.p.m./°C

Standard resistance values

1k, 2k, 5k, 10k(Ω)

Special practical resistance values

500, 20k, 50k(Ω)

Total resistance tolerance

Standard class ±15%(L)，Precision class ±10%(K)

Conformity tolerance (peak-peak)

Standard class ±2.0%，Precision class ±1.0%

Resolution

Essentially infinite

Output smoothness

≤0.1% against input voltage

Contact resistance variation

≤8%C.R.V.

Electrical travel

360º（Endless）

Power rating

0.5W

Insulation resistance

≥1000MΩ (500V.D.C.)

Dielectric strength

500V.A.C./1 min

Special shaft type

Shaft with front and rear extension (Rear shaft with 3mm dia. and 10mm length), shaft dia. (φ3.175mm) with inch dimension, special machining on the shaft

Multi-ganged

Up to 3 gangs. Housing length is extended by 16mm per gang.

Special protection grade (IP)

IP54