Mechanical travel

3,600°

Protection grade (IP)

IP40

Starting torque

 Bushingmount type：≤3mN·m (30gf·cm)

Stopper strength

Servomount type：≤2mN·m (20gf·cm)

Appropriate fastening torque of the nut

Approx. 0.15N·m (1.5kgf·cm)

Rotational life expectancy

≤0.8N·m (8kgf·cm)

Mass

25℃，No load at 40r.p.m.;5Turns: 5,000,000shaft revolutions;10Turns: 10,000,000 shaft revolutions;Total resistance value variation: ≤±5％ against initial value;Independent Iinearity tolerance: ≤150％ of specified value;Output smoothness：5 Turns:0.2% against input voltage;10 Turns: ;against input voltage"

Operating temperature range

-55℃~+105℃

Temperature cycle

5 cycles under -55℃~+105℃, total resistance value variation: ≤± 5％, No mechanical damage.

Exposure at low temperature

24 hours at -55℃, Total resistance value variation: ≤±5％, No mechanical damage.

Exposure at high temperature

1,000 hours at 105℃, Total resistance value variation: ≤±5％, No mechanical damage.

Vibration

10Hz~2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±5％, No mechanical and electrical damage.

Shock

490m/s², 11ms, 18 times, Total resistance value variation: ≤±1％, No mechanical and electrical damage.

Moisture resistance

40℃, 95％RH, 120 hours, Total resistance value variation: ≤±10％,Insulation resistance: ≥10MΩ.

Resistance temperature coefficient

±100p.p.m./℃

Standard turns

10 Turns

Standard resistance values

2k, 5k, 10k, 20k, 50k (Ω)

Total resistance tolerance

Standard class ±10%(K)，Precision class ±5%(J)

Independent linearity tolerance

Standard class ±0.4%，Precision class ±0.1%（≤5kΩ, ±0.2%）

Resolution

Essentially infinite

Output smoothness

≤0.05% against input voltage

Contact resistance variation

≤5%C.R.V.

Electrical travel

3,600°±5°

Power rating

1.0W

Insulation resistance

≥1000MΩ (500V.D.C.)

Dielectric strength

1000V.A.C./1 min

Special shaft type

Shaft with front and rear extension (Rear shaft with 0.8mm dia. and 10mm length), special machining on the shaft

Speical turns

5Turns（S12HHP-5）

Speical protection grade (IP)

Simple sealed housing IP54 (In the case of servomount type, the housing length becomes longer by 1.2mm.)